Version=3

[General]
Name="VeriCast 71080"
Heater Temperature=15 ; °C
Heater Enable=false ; true/false

[:/Gen-1UV/General]
Printer Classes=["Pico UV385", "PRO UV385"]

[:/Gen-1UV/Curing]
; Cure through = M·T + O
Multiplier=1
Offset=0.12
XY Scale=1.0042

Burn-In Layers=1
Burn-In Exposure=0.5 ; mm
Burn-In XY Compensation = -0.2 ; mm
Base Plate Thickness=0 ; mm

; T [mW/cm²·s , mm]
; 2016-08-04, Pico 2 (385 nm), 37.23 mW/cm², 35.0 °C
Z=[3.723, 0.02]
Z=[7.446, 0.11]
Z=[11.169, 0.17]
Z=[14.892, 0.20]
Z=[18.615, 0.24]
Z=[22.338, 0.26]
Z=[26.061, 0.28]
Z=[29.784, 0.31]
Z=[33.552, 0.34]
Z=[37.23, 0.35]


; XY=[mw/cm²·s, mm]
XY=[9.61532, 0.015737]
XY=[11.17116, 0.007087]
XY=[16.75388, 0.026347]

[:/Gen-1UV/Delays]
Burn-In Wait Time (After Approach)=15 ; s
Normal Wait Time (After Approach)=1 ; s

[:/Gen-2UV/General]
Printer Classes=["MAX UV385"]

[:/Gen-2UV/Curing]
; Cure through = M·T + O
Multiplier=1
Offset=0.12
XY Scale=1.0042

Burn-In Layers=1
Burn-In Exposure=0.5 ; mm
Burn-In XY Compensation = -0.2 ; mm

; T [mW/cm²·s , mm]
; 2016-08-04, Pico 2 (385 nm), 37.23 mW/cm², 35.0 °C
Z=[3.723, 0.02]
Z=[7.446, 0.11]
Z=[11.169, 0.17]
Z=[14.892, 0.20]
Z=[18.615, 0.24]
Z=[22.338, 0.26]
Z=[26.061, 0.28]
Z=[29.784, 0.31]
Z=[33.552, 0.34]
Z=[37.23, 0.35]


; XY=[mw/cm²·s, mm]
XY=[9.61532, 0.015737]
XY=[11.17116, 0.007087]
XY=[16.75388, 0.026347]

[:/Gen-4UV/Curing]
Shrinkage Compensation Enable=false ; true/false
Two-Step Exposure Border Width=0.0 ; mm

[:/Gen-4UV/General]
Printer Classes=["PRO 4K UV385"]

[:/Gen-4UV/Curing]
; Cure through = M·T + O
Multiplier=1
Offset=0.12
Burn-In Layers=1
Burn-In Exposure=0.45 ; mm
Burn-In XY Compensation = -0.10 ; mm
XY Scale = 1.0042

; T [mW/cm²·s , mm]
Z=[3.723, 0.02]
Z=[7.446, 0.11]
Z=[11.169, 0.17]
Z=[14.892, 0.20]
Z=[18.615, 0.24]
Z=[22.338, 0.26]
Z=[26.061, 0.28]
Z=[29.784, 0.31]
Z=[33.552, 0.34]
Z=[37.23, 0.35]


; XY=[mw/cm²·s, mm]
XY=[9.61532, 0.015737]
XY=[11.17116, 0.007087]
XY=[16.75388, 0.026347]

[:/Gen-4UV/Curing]
Shrinkage Compensation Enable=false ; true/false
Two-Step Exposure Border Width=0.0 ; mm

Light Intensity Control=1
Light Intensity = 10


[Mechanics]
Slides Per Layer=0
Separation Distance=10
Separation Pressure Limit=500.0
Approach Pressure Limit=100.0
Layer Tolerance=30.0
Motor Timeout=60.0
Traverse Timeout Range=0.15

[Support]
Leveling=true
Leveling Height=3.0
Tallest=false
Tallest Height=0.0
Slope=45
Side Feature=2.0
Spacing=3.0
Strength=40
Torsion=0
Intersupport=false
Contact=0.5
Overshoot=0.3
MaximumWidth=2.3
Side Faces=8
AspectRatio=5